Filter
Top Products
Changing the Pre-programmed Setting
You can change the pre-programmed cooking time and Cook Power in AUTO SET to the time and powe ‘:,
you most often use. To change the AUTO SET setting, follow these steps.
‘&,,
a
1.
Touch AUTO SET twice.
i-~
2. Touch the Number Pads for the new desired cooking time. If high Cook Power is desired, skip
to Step 5.
3.
Touch COOK POWER.
4. Touch the Number Pad for the desired Cook Power.
;’ .‘_
5. Touch AUTO SET. Touch CANCEL. The oven will remember that time and Cook Power for future
use. NOTE: If electric power ever goes off, the oven will go back to the
pre-programmed 2 minutes, 30 seconds at HIGH Cook Power setting.
Auto Set TEMP
Auto Set TEMP provides ten preset probe temperatures (see “Cooking with the Tempera-
ture Probe” on page 19). One hundred ten (110) to one hundred ninety (190) degrees at
70% Cook Power can be set by touching TEMP and the corresponding Number Pad l-9.
This provides a short-cut method for setting commonly used probe temperatures. The
Auto Set Chart included with your microwave oven and the Auto Set Guide on the inner
door panel help you use TEMP to cook various food items without having to look up the
temperature.
A preset temperature of 165°F at HIGH Cook Power is available (after inserting the probe)
by touching just the TEMP Pad. This temperature may be changed to any temperature
from 90°F to 200°F allowing you to store your favorite cooking temperature and Cook
Power. See page 14 instructions.
DO THIS...
THIS HAPPENS...
Y
1.
Put food in the oven and
close the door.
2.
Touch TEMP.
(Option: Skip to Step 6 if
you want to use the pre-
set temperature and
Cook Power.)
3. Touch a Number Pad for
the new temperature you
want from 110°F to 190°F.
The Display will show what you
touched in degrees Fahrenheit.
This example shows140”F
4.
Touch COOK POWER.
(Option: Skip to Step 6 if
you want to cook at 70%
power.)
The COOK POWER Indicator Light
will come on and the Display
will show “P-701’
continued on next page