Filter
Top Products
7. Touch COOK POWER. (Option:
Skip to Step 9 if you want20 use
high power.)
The COOK POWER Indicator Light will
come on and the Display will show
“P-HI:’ This shows the oven is pre-
programmed to cook at full (HIGH)
power.
The Display will show what you
touched. This example shows you
touched Number Pad 7 for 70%
of full power.
The AUTO START Indicator Light will
stay on. All other Indicator Lights will
go off. The Display will go back to
showing the time of day.
When the time of day reaches the time
you have set in AUTO START, the AUTO
START Indicator Light will go off, the
COOK 1 and COOK POWER Indicator
Lights will come on, the cooking time
will show on the Display, and the oven
will start cooking.
d
count
0Wt-l
The Display counts down the time to
show how much time is left in COOK 1.
For 2 of every 10 seconds the Display
will show the Cook Power you
selected, if you are using a Cook
Power other than HIGH.
When the cooking time ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching
CANCEL.] “End” will remain on the
Display and a reminder tone will
sound every 60 seconds (to remind
you that food is left in the oven] un
the door is opened or CANCEL is
touched. The Display will then show
the time of day.
Note: If the oven light and fan come
on when you touch START, the
Start
Time has not been set correctly.
Open and close door, reprogram
AUTO START time, then touch START.
continued on next page
-1 _