Filter
Top Products
2. Touch Number Pads for the
correct time of day.
The Display will show what numbers
you touched in the order you
touched them. This example shows
3:25.
m
I -
3.
Touch START.
The colon will stop flashing. The Clock
is set.
If you have touched in an incorrect
time, such asl2:65, “Err” will show on
the Display. Touch CLOCK SET and
start over.
NOTE: TO reset the Clock, touch CLOCK SET. The current time will show on the Display
and the colon will flash. Continue to set the Clock as shown above.
Using the Minute Timer
The Minute Timer does not start or stop cooking. It can be used alone or while the oven is
operating. It works like a kitchen timer.
DO THIS...
THIS HAPPENS...
The MINUTE TIMER Indicator Light will
come on and the Display will show a
“0:’ The first Number Pad must be
touched within 5 seconds or the Dis-
play will go blank. If this happens,
touch MINUTE TIMER again and
continue.
2. Touch Number Pads for
minutes and seconds.
The Display will show what numbers
you touched in the order you
touched them. This example shows
1 minute, 45 seconds.
The MINUTE TIMER Indicator Light will
stay on to show that the Minute Timer
is running.
The Display counts down the
seconds to show how much time
iS
left on the Minute Timer.
When the set time is up, a 3 second
signal will sound and the Display
will show the time of day.
continued on next page