Filter
Top Products
Using your microwave oven
The Control Panel ON/OFF switch must be in the “ON” position to cook. See page 7.
Microwave oven controls
There are three parts In the control section
-The Digital Drsplay! Clock,
-Command Pads and Slgnal Lights
- Number Pads
Instructions for each control are covered on the
following pages. Read them carefully.
When You first plug In the oven, the Display
will
show 88 88 If after You set the Clock
Control Panel ON /OFF Switch
(page 6), the Display again shows all 8’s. It
means your electricity was off for a while
Reset the Clock
One note The Command and Number
Pads are not buttons. You don’t have to
push them just touch them
1
Digital display/clock
m When you are not
using the mlcrowave
oven, this
IS
on accu-
rate dtgital clock
When You are ustng the microwave oven
this displays time settings and shows You
what number pads You touched
Command pads and signal lights
Touch Com-
mand Pads to tell
the mrcrowave
oven what to do
and in what order
A few examples
-CLOCK SET tells
See page 22 for tnformation on the tone you
hear when touching any pad
Each Command Pad [except START and
CANCEL) lights a Signal Light.The Signal Light
comes on when you touch the Command Pad.
While the oven
IS
running, a Signal Light
(or lights) will be on to show what the oven
is doing
Number pads
q H q
Z$tPower,
m
temperature