Filter
Top Products
count
The Display counts down the time to show
d
own
how much cooking time is left in the first
cycle
E@tP
When the cooking time ends You will hear
4 beeps (You con stop the beeping by
%&P
opening the oven door or touchrng CAN-
CEL ) When the beeping stops, the Display
will show the time of day
Changing the cooking time
YOU
can change the cooking time anytime during the cycle.
1 Touch COOK CYCLE 1
2 Touch numbers for new time
3 Touch START
COOK CYCLE 1 will continue cooking for the new time
lower cook powers
For best results, some recipes toll for lower Cook Powers. The lower the Cook Power,
the slower the cooking. Each Number Pad on your microwave oven stands for a
different percentage of Cook Power. Many recipes in your MICRO MENUS* Cookbook
tell you, by number, which Cook Powerto use. Recipes in other books and magazines
may tell you by name (HI, MED, LO, etc.] or percentage (IO’%, 50%, 80%, etc.)
The following char-t gives you the percentage of Cook Power each Number Pad
stands for, and Cook Power name usually used.
.lmk
automatic 100% of full power HIGH 4 ~~ 40% of full power
9
9046 of full power 3
30% of full power MED-LOW
8 80% of full power 2
20% of full power
7
70% of full power MED-HIGH
1 ~~ 10% of full power LOW
6
60% of full power
0 ~ no power (fan and light
5
50% of full power MED
will be off]
1.
2.
3.
4.
8
DO THIS...
THIS HAPPENS...
Put food in the oven and
close the door.
Touch COOK CYCLE 1.
Touch Number Pads for
the cooking time you
want.
Touch COOK POWER.
The COOK CYCLE 1 Signal Light will come
on and the Display will show four O’s
The Display will show the numbers you
touched in the order you touched them.
This example shows 7 minutes, 30 seconds
The COOK POWER Signal Light will come on
and the Display will show two O’s