Filter
Top Products
Using Your Microwave Oven
Microwave oven controls
There are three parts in the control section:
- Digital Display/Clock and Indicator Lights
- Command Pads
- Number Pads
Instructions for each control are covered on the
following pages. Read them carefully.
When you first plug in the oven, a tone will sound
and the Display will show 88% If after you set the
Clock (pages 10-l l), the Display again shows all
8’s, it means your electricity was off for a while.
Reset the Clock.
Digital display/cluck and indicator lights
When you are not using the microwave oven, this
is an accurate digital clock.
When you are using the microwave oven, it
displays time settings, temperature settings, and
Indicator Lights.
Command pads
Touch Command Pads to tell the microwave oven
what to do and in what order. A few examples:
- CLOCK SET tells the oven you are going to set
the clock.
- START tells the oven to start.
(See page 10 for information on the tone you
hear when touching any pad.)
Each Command Pad (except START, CANCEL,
and CLOCK SET) lights an Indicator Light when
you touch the Command Pad.
While the oven is running, an Indicator Light (or
lights) will be on to show what the oven is doing.
Number pads
Once you’ve touched a Command Pad to tell the
oven what you want it to do, you’ll touch Number
Pads to tell it...
- a time,
- a Cook Power.
9