Filter
Top Products
When the defrost time ends, the microwave
count
oven automatically lets the food stand for
the same amount of time used for
d
own
detrostlng. The Display counts down the
standing time. During the countdown, the
oven will be dark and the fan will be off
The defrost Signal Light will be on.
P
When the standing time is over, you will
hear a beep and the first cooking cycle
will start
-4 The COOK CYCLE 1 Signal Light will be on
during the first cooking cycle. The COOK
POWER Light will also be on If you are
Wing
a Cook Power other than hlgh.
d
count
own
The Display counts down the time to show
how much time is left in the first cooking
cycle.
For 2 of every 10 seconds, the Display will
show the Cook Power you selected if you
are using a Cook Power other than high.
When the first cooking cycle ends you will
hear a”beep.
The second cooking cycle will start. (If
only one cooking cycle is used, you will
hear 4 beeps and the oven will stop.)
count
d
own
The Display counts down the time to show
how much cooking time is left in the
second cycle.
When the last cooking cycle ends you will
hear 4 beeps. (You can stop the beeping
by opening the oven door or touching
CANCEL.) When the beeping stops, the
Display will show only the ” : “.
Standlng time provides more even
To check or stir foods between or
defrostlng and cooklng because It allows
durlng cycles:
food temperature to even out.
1. Open the door. The oven will shut off
To sklp the automatic standlng time:
2. Check, stir or rotate the food.
l
Instruct the microwave oven to defrost in
3. Close the door.
DEFROST CYCLE and to cook in COOK
4. Touch START. The oven will go on from
CYCLE 2.
where it stopped.