Filter
Top Products
Using your microwave oven
MICROWWE OVEN CONTROLS
When You first plug in the oven, the Display
will show “88:88”if the Control Panel ON/OFF
switch is ON (see page 5). If the Display ever
agaln shows all 8’s, it means Your electricitv
was off for a while or that the Control Panel
ON/ OFF Switch was turned OFF and then
back ON. To clear the 8’s from the Display,
touch CANCEL (the colon remains on) or
touch in cooking instructions.
One note: The Command and Number
Pads are not buttons. You don’t have to
oush them...iust touch them.
DIGITAL DISPLAY
down time settings and it shows you whai
number pads You touched.
COMMAND PADS AND SIGNAL LIGHTS
Touch Com-
mand Pads to tell
the microwave
oven what to do
and in what order.
A few examples:
-COOK CYCLE 1
[or 2) tells the
oven You are
going to cook.
you are going to
cook at less
than full power.
-START tells the oven to start.
Each Command Pad has its own Signal
Light (except START and CANCEL). The Signal
Light comes on when You touch the Com-
mand Pad.
While the oven is running, a Signal Light (or
lights] will be on to show what the oven is
doing.
NUMBER PADS
the oven what vou
I- Control Panel ON /OFF Switch