Filter
Top Products
Using your mbowave oven
MICROWWE OVEN CONTROLS
When you first plug in the oven, the Display
WIII show “88:88” if Ihe Control Panel ON/OFF
sw/!ch IS ON (see page 5). If the Display ever
again shows all 8’s, it means Your electricity
was off for a while or that the Control Panel
ON/OFF Switch was turned OFF and then
back ON. To clear the 8’s from the Display.
touch CANCEL (the colon remains on) or
touch In cooking Instructions
L Control Panel ON/OFF Switch
One note: The Command and Number
Pads are not buttons. You don’t have to
push them...just touch them.
L
~__
DIGITAL DISPLAY
When You are
using the microwave
oven, this acts as a
display It counts
down time settings and it shows you what
number pads you touched
COMMAND PADS AND SIGNAL LIGHTS
Touch Com-
mand Pads to tell
the microwave
oven what to do
and in what order
A few examples
-COOK CYCLE 1
(or 2) tel!s the
oven You are
going to cook
-COOK POWER
tells the oven
you are going to
cook at less
thari full power
- START tells the oven to start
Each Command Pad has Its own Signal
Light (except START and CANCEL). The Signal
Light comes on when you touch the Com-
mand Pad.
See page 19 for Information on the tone you
hear when touching any pad
While the oven IS running. a Slgnal Light (or
lights] WIII be on to show what the oven IS
doing
,NUMBER PADS
Once you’ve
touched a Com-
mand Pad to tell
the oven what you
want It to do, you’ll
louch Number
Pads to tell it
-
a time,
-
o Cook Power,
-
a food
temperature