Filter
Top Products
Auto Set TEMP
Auto Set TEMP provides ten preset probe temperaturesettings. One hundred ten (110) to one
hundred ninety (190) degrees at 70% Cook Power can be set by touching TEMP and the
corresponding Number Pad 1-9. This provides a short-cut method for setting commonly
used probe temperatures. The Auto Set Chart included with your microwave oven and
the Auto Set Guide on the inner door panel help you use TEMP to cook various food items
without having to look up the temperature.
A preset temperature of 165 F at HIGH Cook Power is available after inserting the probe
by touching just the TEMP Pad. This temperature may be changed to any temperature
from 90 F to 200 F allowing you to store your favorite cooking temperature and Cook
Power. See page 14 for instructions
DO THIS...
1.
Put food in the oven and
close the door.
2.
Touch TEMP.
(Option: Skip to Step 6 if
you want to use the pre-
set temperature and
Cook Power.)
3. Touch a Number Pad for
the new temperature you
want from 110°F to 190°F.
THIS HAPPENS...
The AUTO SET Indicator Light
will come on and the Display will
show 165°F (or the temperature
you have programmed as your
favorite cycle).
The Display will show what you
touched in degrees Fahrenheit.
This example shows 140°F NOTE:
Cook Power of 70% is preset
on TEMP settings l-9.
The COOK POWER Indicator Ltght
will come on and the Drsplay
WIII
show “P-70”
4.
Touch COOK POWER.
(Option: Skip to Step 6 if
you want to cook at 70y0
power.)
The Display WIII show what you
touched This example shows you
touched Number Pad 5 for 50°0 of
full power
5. Touch a Number Pad for
the Cook Power you want.
continued on next page