Filter
Top Products
Using your microwave oven
Microwave Oven Controls
There are three parts in the control section:
When you first plug in the oven, a tone sounds
-The Digital Display/Clock, and Indicator Lights
and the Display will show 88:88. If after you set
-Command Pads
the Clock (page 6), the Display again shows
- Number Pads
all 8’s; your electricity was off for a while. Reset
the Clock.
Instructions for each control are covered on the
following pages. Read them carefully.
Digital Display/Clock and
Indicator lights
When you are not using
the microwave oven, this
is an accurate Digital
Clock. When you are
using the microwave
oven, it displays time set-
tings, Indicator Lights
and shows what Number
Pads you touched.
Command Pads
Touch Command Pads
to tell the microwave
oven what to do and in
what order. A few
examples:
- CLOCK SET tells the
oven you are going
to set the Clock.
- START tells the oven
to start.
See page 6 for informa-
tion on the tone you hear
when touching any pad.
Each Command Pad, (except START, CANCEL
and CLOCK SET] lights an Indicator Light on the
Digital Display. The Indicator Light comes on
when you touch the Command Pad.
While the oven is running, an Indicator
Light (or lights] will be on to show what
the oven is doing.
Number Pads
’
0
-
a food
8
temperature.