Filter
Top Products
6. Touch COOK POWER.
(Option: Touch START if you
want to use HIGH power.)
7. Touch a Number Pad for the
Cook Power you want.
8. Touch START.
d
COdI
QWtl
BEEP BEEP
d
COdI
OWll
The COOK POWER Indicator Light
Will
come on
and the Display will show
“P-HI:’ This shows the oven is pre-
programmed to cook at full (HIGH]
power.
The Display will show what you
touched. This example shows you
touched Number Pad 6 for 60%
of full power.
When you touch START, the QUICK
DEFROST Indicator Light will stay on. All
other Indicator Lights will go off. The
Display counts down the time to show
how much time is lett in the Quick
Defrost cycle.
When the defrost time ends, the micro-
wave oven automatically lets the food
stand for the same amount of time
used for defrosting. The QUICK
DEFROST Indicator Light stays on and
the Display counts down the standing
time. During the countdown the oven
will be dark, and the fan will be off.
When the standing time is over, you
will hear 2 beeps and the Cook cycle
will start.
The COOK Indicator Light will be on dur-
ing the Cook cycle. The COOK POWER
Indicator Light will also be on if you are
using a Cook Power other than HIGH.
The Display counts down the time
to show how much time is left In the
second cycle
When the Cook cycle ends, “End” will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching
CANCEL.) “End” will remain on the
Display and a reminder tone will
sound every 60 seconds until the
door is opened or CANCEL is touched.
The Display will then show the time
of day.