Filter
Top Products
4.
Touch START.
d
CDL&
QWtl
The oven will automatically cook at
high Cook Power.
The COOK Indicator Light will stay on to
show that the oven is cooking.
The Display counts down the time to
show how much time is left in the first
cycle.
When the cooking time ends, “End”
will show on the Display and 4 beeps
will sound. (You can stop the beeping
by opening the door or by touching
CANCEL.) “End” will remain on the
Display and a reminder tone will
sound every 60 seconds until the door
is opened or CANCEL is touched.
The Display will then show the time of
day.
Changing the Cooking Time
(In-use Reprogramming]
Cooking time can be changed any time before touching START or during the cycle:
1. Touch COCK.
2. Touch numbers for the new time.
3. Touch START.
Cook will continue cooking for the new time.
Cooking at Lower Cook Powers
For best results, some recipes call for lower Cook Powers, The lower the Cook Power, the
slower the cooking. Each Number Pad also stands for a different percentage of Cook power,
Many recipes in your MICRO MENUS” Cookbook tell you, by number, which Cook Power to use,
Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.) or
percentage (10% 50%, 80%, etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and
Cook Power name usually used.
automatic 100% of full power HIGH
9 ~ 90% of full power
8 = 80% of full power
7 = 70% of full power MED-HIGH
6 : 60% of full power
4 ~ 40% of full power
3 30% of full power MED-LOW
2 7 20%
of
full power
1 = 10% of full power LOW
0 no power (fan and light will be off]
5 = 50% of full power MED
DO THIS...
THIS HAPPENS...
1.
Put food in the oven and
close the door.
m
a.
2.
Touch COOK.
The COOK Indicator Light will come
on and the Display will show four 0’s.
continued on next page
13