Filter
Top Products
THE OUTER OVEN WINDOW
REMOVING
With the door closed, remove
the screws from the top of the
outer window frame.
Tip the window and frame out
Lift up on both sides of the
from the top slightly.
frame.
REPLACING
Fit the tabs at the bottom of
Push the top of the frame into Replace the screws.
the frame into the bottom of
the opening while pushing
the window opening.
down.
USING FOIL
Using foil on the oven bottom is recommended only if the foil is used properly.
Cut foil from a roll of heavy-duty IS-inch (45 cm) aluminum foil, or buy a foil kit
[Part No. 241430) from your Whirlpool Appliance dealer.
Lift the cool bake element
slightly to lift the feet off the
oven bottom.
10
Slide the foil under the bake
element.
Make sure foil is centered,
long enough to start up both
sides, and without wrinkles.
For proper baking, lower the
bake element so all feet
rest solidly on the foil.