Whirlpool RBD276PD Oven User Manual


 
7.After cooking, turn off oven.
PRESS
YOU SEE
(single
ovens)
(double (time
of day)
ovens)
Adjusting the oven temperature control
Although your new oven is properly adjusted
NOTE: DO NOT measure oven temperature
to provide accurate temperatures, it may
with a thermometer. Opening the oven door
cook faster or slower than your old oven. If,
will lower the oven temperature and give you
after using the oven for a period of time, you
an inaccurate reading. Also, the thermom-
are not satisfied with the baking/roasting eter temperature reading will change as your
results, you can change the offset tempera- oven cycles.
ture by following these steps:
NOTE: Displavs shown are from single/
upper ovens. kommand pads shown are
from double ovens. In some cases, lower
oven displays and single oven command
pads may look different than those shown.
1. Press and hold Bake pad for
PRESS
YOU SEE
(factory setting of “0”)
2. Set new offset temperature.
PRESS YOU SEE
Press A to raise the temperature or V to
lower the temperature in 10°F amounts.
You can set the temperature change to
as low as -30°F or as high as +3O”F. A
minus (-) sign will appear before the
u -
number when decreasing the tempera-
(example when making oven
ture setting to show the oven will be
10°F hotter)
cooler by the displayed amount. There is
no sign in front of the number when
increasing the temperature setting.
3. Enter the adjustment.
14