Filter
Top Products
Surface Units and Reflector Bowls
2. Lift the edge of the unit opposite
the receptacle, just enough to
clear the reflector bowl (and trim
ring if you have porcelain-enamel
reflector bowls).
3. Pull the surface unit straight away
from the receptacle.
Replacing
4. Lift out the reflector bowl (and trin
ring if you have porcelain-enamel
reflector bowls). See Cleaning
Chart on page 24 for cleaning
instructions.
2. Line up opening in the reflector
bowl (and notch in the trim ring
you have porcelain-enamel
reflector bowls) with the surface
unit receptacle.