Whirlpool 3ET22DKXDN00 Refrigerator User Manual


 
Removing the freezer shelf
To remove the shelf:
1. Lift right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.
Removing the pull-out freezer floor
The freezer floor pulls out for easier access
to foods in the back of the freezer and for
easier cleaning.
To remove the freezer floor:
1. Pull floor out about 2.5 cm (1 inch) with
one hand at center front.
2. Lift floor up at rear until hooks release
from cabinet.
3. Pull floor out the rest of the way.
To replace the freezer floor:
1. Position back of floor into freezer opening.
2. Slide floor straight in until hooks drop into
place at rear of cabinet.
Using the ice cube trays
If cubes are not used, they may shrink. The
moving cold air starts a slow evaporation. The
longer you store cubes, the smaller they get.
To remove ice:
1. Hold tray at both ends.
2. Twist slightly.