Filter
Top Products
Removing the base grille
To remove the grille:
1. Open refrigerator door.
Condenser
2. Pull base grille forward to release the
support tabs from the metal clips.
3. Do not remove Tech Sheet fastened
behind the grille.
To replace the grille:
1. Line up grille support tabs with metal clips.
2. Push firmly to snap into place.
3. Close refrigerator door.
See cleaning instructions for defrost pan and
condenser coils on page 18.
Defrost pan Base
Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb or remov-
ing a light shield for cleaning, either
unplug the refrigerator or disconnect
the electricity leading to it at the main
power supply.
Failure to do so could result in electri-
cal shock.
To change the refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Panel to remove
bulb.
3. Replace with a 60-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change freezer light:
1. Disconnect refrigerator from power supply.
2. Grasp top and bottom of light shield.
3. Squeeze and pull light shield out.
4. Replace with a 25watt appliance bulb.
5. Snap light shield into place.
6. Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs
will fit your refrigerator. Be sure to replace a
oulb with one of the same size and shape.
Eib
4 g
\ ,w-
w