Filter
Top Products
PART
WHAT TO USE
HOW TO CLEAN
Door liners
and gaskets
Plastic parts
(covers and
panels)
Sponge, soft cloth,
l Wash, rinse or wipe, and dry thoroughly.
or paper towel with
mild detergent and
DO NOT USE cleaning waxes, concen-
trated detergents, bleaches or cleaners
warm water
containing petroleum on plastic parts.
Soft, clean sponge
l Wash, rinse or wipe, and dry thoroughly.
or soft, clean cloth
with mild detergent
DO NOT USE paper towels, window
and warm water
sprays, scouring cleansers, or flammable
fluids. These can scratch or damage
material. See “Important Safety Instruc-
tions” on page 3.
Defrost pan
Condenser
coils
Sponge or cloth
l Remove base grille. (See page 16.)
with mild detergent
l Reach into small opening at right edge and
and warm water
remove the defrost pan.
l Wash, rinse, and dry thoroughly.
l Replace defrost pan. Make sure to push it
completely into the opening.
l Replace base grille.
Vacuum cleaner
l Remove base grille.
with extended
l Vacuum coils when dusty or dirty. Coils
narrow
may need to be cleaned as often as every
attachment
other month.
l Replace base grille.
Floor under
refrigerator
Floor cleaners
l Roll refrigerator out only as far as the water
supply line allows.
l Clean floor.
l Roll refrigerator back into place.
l Check to see if the refrigerator is level.
Holiday and moving care
Short holidays
No need to shut off the refrigerator if you will
be away for less than four weeks.
1. Use up any perishables.
2. Freeze other items.
3. Raise ice maker signal arm to OFF
(up) position.
4. Shut off water supply to ice maker.
5. Empty the ice bin.