Filter
Top Products
The Lower Panel
The lower panel can be removed to help make it easier to clean under the
range and to check for installation of the anti-tip bracket.
To remove the lower panel:
1.
Pull out bottom of panel.
To replace the lower panel:
2. Slightly swing out and lift panel to
remove from top clips.
I
I
1.
Place notches in top of panel over
the top clips.
2. Swing down and push bottom of
panel to secure bottom clips.
To verity the anti-tip bracket
is engaged:
l
Remove the lower panel.
l
Look to see if the anti-tip bracket
is attached to floor with screws.
l
Make sure one rear leveling leg
is positioned under the anti-tip
bracket.
l
See Installation Instructions for
further details.
22