Filter
Top Products
4. When terminal is pushed into the
receptacle as far as it will go, push
down
the edge of the surface unit
opposite the receptacle. The element
hold-down clip will keep the surface unit
from moving around.
NOTE: Reflector bowls reflect heat back to
the utensils on the surface units. They also
help catch spills. When they are kept clean,
they reflect heat better and look new longer.
If a reflector bowl gets discolored, some of
your utensils may not be flat enough, or
some may be too large for the surface unit.
In either case, some of the heat that’s meant
to go into or around
a
utensil goes down and
heats the reflector bowl. This extra heat can
discolor it.
Lift-up cooktop
1.
Lift front of cooktop at both front corners
until the support rods lock into place.
Personal Injury Hazard
Be sure both support rods are fully
extended and in the locked position.
Failure to do so could result in per-
sonal injury from the cook-top acciden-
tallv falling.
Product Damage Hazard
Do not drop the cook-top.
Damage could result to the porcelain
and the cooktop frame.
2.
Wipe
with warm, soapy water. Use a
soapy steel-wool pad on heavily soiled
areas.
3. To
lower the cooktop, lift
cooktop from
both sides while pressing the support
rods back to unlock them.
Lower
the
cooktop into place.
25