Whirlpool RF3600XY Range User Manual


 
PROBLEM
Control
knob(s) will
not turn
POSSIBLE CAUSE
SOLUTION
You are not pushing in before
Push control knob(s) in before turning
turning. to a setting.
Self-Clean- You have
not set the Oven Set both the Oven Selector and Oven
ing cycle will
Selector and Oven Temperature
Temperature Control Knob to CLEAN.
not operate
Control Knob to CLEAN.
The range clock does not show
Reset clock to show the correct time
the correct time of day.
of day. (See page 11.)
The Lock Lever is not in the
Move Lock Lever all the way to the
CLEAN position-all the way to right.
the right.
The Start Time Dial does not
show the correct time of day or
the knob is not all the way out.
The Stop Time Dial is not set
ahead to the time you want the
Self-Cleaning cycle to stop.
Reset the Start Time Knob to show
the correct time of day. Pull knob out
all the way.
See Step 3 in “Setting the controls” on
page 21 for proper setting instructions.
Cooking
The range is not level.
results are
Level range. (See Installation Instruc-
tions.)
not what you
expected
The oven temperature seems
Adjust the oven temperature control.
too low or too high.
(See “Adjusting the oven temperature
control” on page
12.)
You have not preheated the
Preheat oven if called for in recipe.
oven as the recipe calls for.
The recipe has never been
tested or is not from a reliable
source.
Use only tested recipes from a reliable
source.
The pans are not the type or size
Refer to a reliable cookbook for recom-
recommended in the recipe.
mended pan type and size.
There is not proper air circulation Allow 1% to 2 inches (4-5 cm) on all
around pan when baking.
sides of the pans for air circulation.
There must be a minimum space of
1 inch (2.5 cm).
The cooking utensils are not the
Use cooking utensils with smooth, flat
proper shape or do not fit the
bottoms that fit the surface units being
surface units being used.
used.
29