Filter
Top Products
The Storage Drawer
The storage drawer is for storing pots and pans. The drawer can be removed to
make it easier to clean under the range, and to check for installation of the
anti-tip bracket.
Use care when handllng the drawer.
Removing the stomge drawer
1.
Empty drawer of any pots and pans
2.
before removing drawer. Pull drawer
Liff back slightly and slide drawer
straight out to the first stop. Lift front
all the way out.
and pull out to the second stop.
Replacing the storage drawer
1.
Fit ends of drawer slide rails into
the drawer guides on both sides
of opening.
14
2. Lift drawer frontand push in until
metal stops on drawer slide
rails clear white stops on drawer
guides. Lift drawer front again
to clear second stop and slide
drawer closed.
To verity the antl-tlp bracket
Is engaged:
l Remove the storage drawer.
l Look to see if the anti-tip bracket is
attached to floor with screws.
l Make sure one rear leveling leg is
positioned under the anti-tip
bracket.
l See Installation Instructions for
further details.