Filter
Top Products
6. Push the Start/Enter pad. The Delay
Indicator Light will light up in the display
to indite that the oven is programmed
to start at a later time. The Cock Time
and Stop Time Indicator Lights will flash.
NOTE: You can change a time setting
after pushing the Start/Enter pad by
repeating just Steps 4 and 5 or 6 and 7.
9. When the start time is reached, the
Delay Indicator Light will go off, a single
tone will sound and the display will
count down the baking/roasting time in
minutes.
10. When the baking/roasting time is
completed, the oven will turn off
automaticalty, beep four times, and
“End” will show in the display. You will
also hear two tones once every minute
until you push the Off/Cancel pad.
NOTE: To disable the reminder tones,
push and hold the Timer Set pad for 4
seconds. To reactivate the tones, repeat
this procedure.
. -
m
.
DELAY
TIME
m
%fii
11. Turn both the Oven Selector and the
Oven Temperature Control Knob to
OFF.
27