Whirlpool RF386PXG Range User Manual


 
NOTE: Make sure the clock is set to the correct
time of day. (See “Setting the clock” in the “Using
Your Range” section.)
1. Press AUTO CLEAN.
This will automatically set a 3
1
2-hour
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1
2 hour before the cycle is over.
2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3
1
2 hours, use the hour and minute
pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 2
1
2-4
1
2 hours shows on the display.
Use 2
1
2 hours for light soil.
Use 3
1
2-4
1
2 hours for average to heavy soil.
3. Start the oven.
The door will lock as soon as you press
START/ENTER.
4. After Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
LOCK’D goes off and the door unlocks.
5. After the oven cools to room temperature, wipe
off any residue or ash with a damp cloth or sponge.
If needed, touch up spots with a mildly abrasive
cleanser or cleaning sponge.
SETTING THE CONTROLS
26
USING THE SELF-CLEANING CYCLE
PRESS YOU SEE
AUTO
CLEAN
CLEAN TIME
PRESS YOU SEE
(example shows 4
1
2-hour
cleaning time)
YOU SEE
CLEAN
HR MIN
CLEAN TIME
PRESS YOU SEE
START
5 SEC
ENTER
HEAT LOCK'D CLEAN TIME
O
N