Filter
Top Products
3. IMPORTANT:
After cleaning,
apply a thin coat of salt-free oil to
the CCCL surface unit, then heat
3-5 minutes. It may still smoke
slightly when heated. If surface
units have dark spots caused by
grease and food, the oil treatment
will improve their appearance
but not eliminate the spots.
NOTE:
Optional Electrol dressing can
be applied to the surface units
to improve their appearance.
4. The stainless steel trim rings
will gradually yellow from the
heat of the surface units and
pans. This is normal. The yellow-
ing can be removed by using
stainless steel cleaner or Cook
Top Polishing Creme on the trim
rings.
To obtain order information
for Cook Top Polishing Creme
(PN 814009) or Electrol dressing
(PN 814030), write to:
Whirlpool Corporation
Attention: Customer Service Dept.
1900 Whirlpool Drive
LaPorte. IN 46350