Filter
Top Products
Using Your Range
. .
3
!
II’;
Using the surface units
Control knobs must be pushed
in before turning them to a setting.
They can be set anywhere between
HI and OFF.
Surface unit markers
The solid dot in the surface unit marker
shows which surface unit is turned on
by that knob.
Surface unit indicator lights
One of the Surface Unit Indicator Lights
on the control panel will glow when a
surface unit is on.
Hot surface indicator lights
The Hot Surface Indicator Lights on
the cooktop surface will glow when the
surface units are turned on. The Indica-
tor Lights will continue to glow as long
as the surface units are too hot to touch,
even after they are turned off.
Burn and Fire Hazard
Be sure all control knobs are
turned to OFF and all indicator
lights are OFF when you are not
cooking. Someone could be
burned or a fire could start if a
surface unit is accidentally
left ON.
NOTE: The surface elements may
smoke slightly and emit a burning odor
during the first few hours of use. This is
normal. It is caused by the insulation
material of the new ceramic cooktop
elements and will not occur again.
5