Filter
Top Products
SURFACE UNIT OVEN LIGHT
INDICATO\RS SWITCH
/
RIGHT REAR ’ RIGHT SURFiCE
RIGHT FRO‘NT
CONTROL KNOB UNIT SIGNAL
CONTROL KNOB
Using your range llGHT
Using the Surface Units
Control knobs must be pushed in
before turning
them to a setting. They
can be set anywhere between HI
and OFF.
Surface Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal light
i One of the signal lights will glow
when a surface unit is on.
Use HI
to start
Use MED-HI
Use MED
Use MED-LO
Use LO
to
foods cook-
to hold a
for gravy,
to keep food
keep food
ing; to bring
rapid boil; to
puddings
cooking after warm until
liquids to a
fry chicken
and icing; to
starting- it ready to
boil.
or pancakes. cook large on a higher
serve. Set the
amounts of
setting.
heat higher
vegetables. or lower
CAUTION: The use of the HI settlng for long perfods of time
can damage surface units and discolor chrome trim rings.
Start cooklng on HI and turn control down to continue
cooklng.
I
within the LO
band to keep
food at the
temperature
you want.
5
Until you get used to the settings, use the following as a guide.
For best results,
start cooking at the high settings; then turn the contra! knob down to continue
cooking.