Filter
Top Products
Using Your Microwave Oven
Continued
Programming tone
Each time you touch a pad you will hear
a tone. If you don’t hear a tone, it is
because the instruction is not correct,
or because the tones have been
removed.
Example: If you touch a Number Pad
before you touch a Command Pad, you
will not hear a tone. The instruction is
not correct.
If you want to remove the
programming tone:
1.
Open the door.
2. Touch CANCEL twice, then touch
START
3. The tone will not sound for any
touch.
If you want to replace the
programming tone:
1. Open the door.
2. Touch CANCEL twice, then touch
START
3. The tone will sound for any correct
touch.
If you want to remove all tones,
except the Minute Timer signal:
1. Open the door.
2. Touch CANCEL twice, touch 0, then
touch START
2. All audible tones will be cancelled.
4. To replace the tones, repeat the
above steps.
Setting the clock
OUICK COOK COOK PROBE KEEP
DEFROST 1
TEMP WARM
When the oven is first plugged in, a tone
sounds and the display shows 88:88. If
h h
the electric power ever goes off, the
-v
[p-]
Display will again show all 8’s when the
.
power comes back on.
- -
You can cook or use the Minute
.
-I
Timer without setting the Clock, but the
vv
Display will be blank after cooking.
AUTO COOK MEAL MINUTE
SENSOR POWER TIMER TIMER