Filter
Top Products
Using Your Microwave Oven
Microwave oven controls
There are three parts to the microwave
oven control section.
-The Digital Display/Clock and
Indicator Lights
-Command Pads
- Number Pads
Instructions for each are covered on
the following pages. Read them
carefully.
When you first connect power to the
oven, a tone will sound and the Display
will show 88:88. If after you set the
Clock (pages 6-7), the Display again
shows all 8’s, it means your electricity
was off for a while. Reset the Clock.
Digital display/clock and
indicator lights
When you are not using the microwave
oven, this is an accurate Digital Clock.
When you are using the microwave
oven, it displays time settings, tempera-
ture settings, and Indicator Lights.
While the oven is running, an Indica-
tor Light (or lights) will be on to show
what the oven is doing.
Command pads
Touch Command Pads to tell the micro-
wave oven what to do and in what order.
A few examples:
-CLOCK SET tells the oven you are
going to set the Clock.
- START tells the oven to start.
Each Command Pad (except START
CANCEL and CLOCK SET) lights an
Indicator Light on the Digital Display.
The Indicator Light comes on when you
touch the Command Pad.
Number pads
Once you’ve touched a Command Pad
to tell the oven what you want to do,
you’ll touch Number Pads to tell it...
- a time,
-
a Cook Power,
- a food temperature,
- a food setting.
5