Filter
Top Products
Using Your Microwave Oven
Continued
20
10. Touch START When you touch
START, the COOK 1 Indicator Light
will stay on while the oven is cook-
ing in the first cycle. The COOK
POWER Indicator Light will be on if
you are using a Cook Power other
than HIGH. All other Indicator
Lights will go off.
The Display counts down the
cooking time to show how much
time is left in the first cycle.
You will hear 2 beeps at the end
of the Cook 1 cycle. You can either
open the door to check, stir or turn
the food, etc., or you can let the
oven start the next cycle. If you do
open the door, touch START after
closing the door to restart the oven.
The COOK 2 Indicator Light will
be on during the second cycle. The
COOK POWER Indicator Light will
also be on if you are using a Cook
Power other than HIGH.
The Display counts down the
time to show how much time is left
in the second cycle.
When the Cook 2 cycle ends,
“End” will show on the Display and
4 beeps will sound. (You can stop
the beeping by opening the door or
by touching CANCEL.) “End” will
remain on the Display and a beep
will sound every 60 seconds until
the door IS opened or CANCEL is
touched. The Display will then show
the time of day.
Hints for cooking with more than
one cycle
You can program the cooking cycles in
any order. However, when the micro-
wave oven is started, it will automati-
cally go through the cycles in the order
of the examples described in this book.
For example, if you program COOK 1,
KEEP WARM and QUICK DEFROST
the microwave oven will automatically
follow this sequence: QUICK
DEFROST + (STANDING TIME) +
COOK 1 + KEEP WARM.
NOTE: The microwave oven will
automatically provide standing time
between QUICK DEFROST and
COOK 1, (See page 22.)