Filter
Top Products
Using Your Microwave Oven
Continued
34
When the time of day reaches
the time you have set for the oven to
stat-l cooking, the oven will beep
twice and the MEALTIMER Indicator
Light will go off. The COOK 1 and
COOK POWER Indicator Lights will
come on. The Display will show the
cooking time, and the oven will stat-l
cooking.
The Display counts down the time
to show how much time is left in
COOK 1.
When the cooking time ends,
“End” will show on the Display and 4
beeps will sound. (You can stop the
beeping by opening the door or by
touching CANCEL.) “End” will
remain on the Display and a beep
will sound every 60 seconds until the
door is opened or CANCEL is
touched. The Display will then show
the time of day.
NOTE: If the oven light and fan come
on when you touch START, the Start
Time feature has not been set correctly.
Open and close the door, reprogram the
cooking sequence and START TIME,
then touch START
Additional information
l
Additional cycles can be set when
using START TIME to star-l cooking at
a later time. Follow instructions under
the proper heading (Using AUTO
SENSOR, Cooking with the Tempera-
ture Probe, Defrosting, Using WARM/
HOLD) before you program START
TIME.
l
You can change time, or add
cycles at any time during the Start
Time cycle.
1. Touch the cycle you wish to change
or add.
2. Touch Number Pads for new time.
3. Touch COOK POWER, if desired.
4. Touch number for new Cook Power,
or touch COOK POWER again if
High is desired.
5. Touch START. The oven will cook at
the new time and Cook Power.
l
Opening the door does not stop the
START TIME operation.