Filter
Top Products
Command Pads
Touch Command Pads to tell the microwave oven what to do and in
what order. A few examples:
-CLOCK SET tells the oven you are going to set the Clock.
-START tells the oven to start.
Each Command Pad (except START, CANCEL and CLOCK SET) lights
an Indicator Light on the Digital Display. The Indicator Light comes on
when you touch the Command Pad.
Number Pads
Once you’ve touched a Command Pad to tell the oven what
you want to do, you’ll touch Number Pads to tell it...
- a time,
- a Cook Power,
- a food temperature,
- a food setting.
Programming Tone
Each time you touch a pad you will hear a tone. If you don’t hear a tone,
it is because the instruction is not correct, or because the tones have been
removed.
EXAMPLE: If you touch a Number Pad before you touch a Command Pad, you
will not hear a tone. The instruction is not correct.
If you want to remove
the programming
tone:
l Open the door.
l Touch CANCEL twice,
then touch START.
l The tone will not
sound for any touch.
If you want to replace
the programming
tone:
l Open the door.
l Touch CANCEL twice,
then touch START.
l The tone will sound for
any correct touch.
If you want to remove
all tones, except the
Minute Timer signal:
l Open the door.
l Touch CANCEL twice,
touch 0, then touch
START.
l All audible tones will
be cancelled.
l To replace the tones,
repeat the above steps.
8