Filter
Top Products
Surface elements and reflector bowls
1.
Make sure all knobs are turned
to OFF.
2. Lift the edge of the element,
opposite the receptacle, just
enough to clear the reflector
bOWI and trim ring.
3. Pull the surface element straighi
away from the receptacle
4. Lift out the reflector bowl and trim
ring
See Cleaning Chart on page 22
for cleaning instructions.
Replacing
1.
Make sure all knobs are turned
to OFF.
2. Line up opening in the reflector
bowl and notch in the trim ring
with the surface element
receptacle.
continued on I next page