Whirlpool RM988PXS Range User Manual


 
‘The cooktop light
The TOP LIGHT switch is located below the control panel. Push the right side of
the switch to turn the light ON. Push the left side to turn it OFF.
To replace the fluorescent lamp and starter:
Remove the 3 screws and metal
trim that supports the top of the
light cover. The glass is heavy.
Hold if securely.
3. Grasp the fluorescent lamp at
both ends. Roll bottom of the lamp
towards the front until both ends
come out of the receptacles. Re-
place with a 24-Inch, 18 or 20-watt
cool-white fluorescent lamp. If starter
needs replacement, push in and turn
to remove and reolace
2. With both hands, pull top of light
cover towards you and lift it out of
bottom support trim.
4. With both hands, carefully fit the
glass light cover into the bottom
metal support trim. Replace the
top support trim and screws.
Turn the electric power back on
at the main power supply