Filter
Top Products
The electronic oven control
Cancel
button
Display
I
Set knob
\
CLEAN ENOIL BAKE
Timer Cl&k
Bake
siop
Clean B;oil
Bake
;fn/Jfn button time
time
button button button
button button
Display/clock
l
When you first connect the range to
power,
the
display
will flash until you set a
new time. If, after you set the clock (page
12) the display again flashes, your electric-
ity has been off. Reset the clock.
l
When you are not uslng the oven,
the
control is an accurate clock.
l
When using the oven or Timer,
the display
will show the time, temperature settings and
what command buttons have been pressed.
l
When showing the time of day,
the display
will show the hour and minutes.
l
When using the Timer,
the display will
show hours, minutes and seconds in the
following sequence:
- For settings from O-l minute 55
seconds,
the display will increase in
5-second increments and count down
each second.
- For settings from 2-10 minutes,
the
display will increase in 1 O-second
increments and count down each second.
- For settings from 1060 minutes,
the
display will increase in 1 -minute incre-
ments and count down each second.
- For settings from l-9 hours 50 min-
utes, the display will increase in 5 min-
ute increments and count down each
minute.
l
When using Bake Time and/or Stop Time,
the display will show hours and minutes.
Command buttons
The command buttons tell the oven what to
do and in what order. A few examples:
-Clock
tells the oven you are going to set
the clock.
-Cancel
tells the oven to turn off.
Each command button (except Cancel) has
its own indicator light. An indicator light
comes on when you push a command
button. Examples: Push the Bake button and
BAKE will light up; push the Broil button and
BROIL will light up.
Set Knob
Once you’ve pushed a command button to
tell the oven what you want it to do, you’ll
use the Set Knob to set a temperature or
time. Turning the Set Knob clockwise
increases the number in the display. Turning
the Set Knob counterclockwise decreases
the number on the display.
11