Filter
Top Products
Audible signals
Audible signals are available to guide you
To replace audible signals:
when setting and using your range. A tone will
l
Push and hold the STOP TIME button.
sound each time you touch a command button.
You will hear one tone.
Three tones signal the end of the electronic
Timer function.
l
Audible slgnals are now replaced.
To remove audible signals:
l
Push and hold
the STOP TIME button.
You will hear two tones.
l
Audible signals
are now removed.
Setting the clock
1. Push
the Clock button. TIME will show in
the display.
l-z-l
2. Turn
the Set Knob until the correct time
shows in the display.
3. Push
the Cancel button to start clock
operation. The clock will start 30 seconds
after setting the time.
c
Using the electronic Timer
The Timer On/Off button does not start or stop
the oven. It works like a kitchen timer. It can be
set in minutes and seconds up to 9 hours, 50
minutes. You will hear three tones when the set
time is up.
1. Push
the Timer On/Off button. TIMER will
come on and the display will show “:OO”.
12