Filter
Top Products
Cleaning and caring
for your range
CONTROL PANEL AND KNOBS
1.
Flrst make sure knobs are set on OFF then
pull knob stralght otf.
2. Use warm soapy water and a soft cloth to
wipe the panel. Rinse and wipe dry
3. Wash knobs In warm soapy water Rinse
well and
4. Push the knobs straight back on. Make sure
they point to OFF
SURFACE UNITS AND
REFLECTOR BOWLS
REMOVING
1.
Be sure surface units are OFF and COOL.
2. Lrft the edge of the unit opposite the recep-
tacle just enough to clearthe reflector bowl.
3. Pull the surface unit straight away from the
receptacle.
4. Lift out the reflector bowl
REPLACING
1.
Be sure surface unit controls are OFF.
-
/
2. Line up opening in the reflector bowl with
the surface unit receptacle.
16