Filter
Top Products
Setting the Controls
Be sure the kitchen is ventilated durlng the Self-Cleaning cycle. This
will help heat, odors and smoke to
disappear from the room as quickly
1.
Set the Oven Selector and Oven
Temperature Control on CLEAN.
2. Lift the panel between the oven
door and the control panel. Move
the Lock Lever
all the way to the
right.
3. Push in and release the Self-Clean
Button. A J-hour Self-Cleaning
cycle will be set automatically.
The Display will count down the
time in minutes. The Auto Oven
Symbol and Self-Clean Indicator
Lights will stay on.
If a cleaning cycle other than 3
hours Is desired,
push in and hold
the Bake Hours Button and turn the
Set Knob to the new time up to
4 hours.
l Use 2 hours for light soil.
l Use 3-4 hours for moderate to
heavy soil.
4. The LOCKED Indicator Light will
come on when the oven tempera-
ture exceeds normal baking tem-
peratures. The Lock Lever must not
be moved and the door can’t be
opened when the light is on.
If you
want to see Stop Tlme of the
Self-Cleaning cycle,
push the
Stop Time Button. Push the Self-
Clean Button to see cleaning time
again.
NOTE: The Bake Hours and Stop
Time Indicator Lights will flash
during the entire Self-Cleaning
cycle.
5. After the cleaning cycle is com-
pleted,
the Auto Oven Symbol
and Self-Clean Indicator Light will
go off. The Display will show the
time of day. When the LOCKED
Indicator Light goes off, move the
Lock Lever back to the left.
Do not
force It.
Wait until it will move
easily.
continued on next page
21