Filter
Top Products
The fan filters must be in place for the fan to
operate properly.
Personal Injury Hazard
Do not put hands in vent box when fan or
controls are on. The vent fan system turns
on automatically when the grill is used.
Turn fan and cooktop controls to OFF.
Failure to do so could result in personal
injury.
Changing the cooktop
modules
The surface burner modules will work on both
sides of the cooktop. (See page 15 for grill
removal instructions.)
Burn and Electrical Shock Hazard
Be sure all controls are off and the mod-
ules are cool before handling modules.
Failure to do so could result in burns or
electrical shock.
To remove surface burner modules:
1. Lift off surface burner grates and caps.
2. Lift slightly by the handle.
3. With both hands, pull module toward you to
clear orifices (gas lines). Lift out.
To replace modules:
1. Line up the venturi (burner inlet tubes) with the
burner orifices.
2. Push the module until it is seated properly.
3. Lower front with the handle.
4. Install surface grates.
11