Filter
Top Products
28
USING THE SELF-CLEANING CYCLE
SETTING THE CONTROLS (MODEL FES330G)
YOU SEE
OVEN ON light goes
on. DOOR LOCKED/
CLEANING light
flashes until you
close door, then is
solid. HEATING light
goes on when oven
starts heating.
1. Set the oven control knob to CLEAN.
The door will lock itself within 6 seconds. If the
door has a problem locking, it will try to lock itself
for 1 minute. If the door fails to lock, the Self-
Cleaning cycle will cancel. An error code will be
displayed.
NOTE: Do not attempt to open the door while in
the locking mode.
2. Set the cleaning time (optional).
Press the “up” (s) or “down” (t) pad(s) to select
a clean time between 2 hours, 30 minutes and 4
hours, 30 minutes.
NOTE: The Self-Cleaning cycle will automatically set
a 3
1
/2 hour cycle unless a different time is selected.
3. During the last 30 minutes of the Self-Cleaning
cycle the oven will start to cool down.
Once the oven goes below the locked
temperature:
4. Turn the oven control knob to OFF.
5. After the oven is cool, wipe off any residue or ash
with a damp cloth or sponge.
If needed, touch up spots with a mild abrasive
cleanser or cleaning sponge.
YOU SEE
OVEN ON and DOOR
LOCKED/CLEANING
lights are on. HEATING
light goes off and COOL
appears in display.
YOU SEE
OVEN ON light flashes.
DOOR LOCKED/
CLEANING light goes
out when door unlocks.
PUSH AND TURN
TURN YOU SEE
OVEN ON light
goes out and time
of day appears in
display.
4
0
0
3
5
0
3
0
0
2
5
0
2
0
0
W
A
R
M
5
0
0
4
5
0
O
F
F
B
R
O
I
L
C
L
E
A
N
4
0
0
3
5
0
3
0
0
2
5
0
2
0
0
W
A
R
M
5
0
0
4
5
0
O
F
F
B
R
O
I
L
C
L
E
A
N
PRESS