Filter
Top Products
To replace:
1.
Be sure
the hinge arms are in the open
position.
Be careful
if pulling the hinges
open by hand. Hinges may snap beck
against the oven frame and could pinch
fingers.
2. Hold
the door at the sides near the top.
Insert
hinge arms into slots at the bottom
of the door. Insert arms evenly, as far as
they will go.
3. If the door is not in line with the oven
frame, remove it and repeat
the above
steps.
4. Replace
the screws on the oven door.
Removing the oven bottom
The panel in the oven bottom can be
removed for cleaning.
Burn Hazard
Make sure all parts are cool before
removing.
Failure to do so coukf result in burns.
To remove:
1.
Remove
oven racks.
2.
Remove
the two hold-down screws at the
rear of the oven.
If screws are too tight
to remove by hand, use
a screwdriver.
3. Place
fingers in slots in bottom panel and
lift rear of panel up and back until lip at
the front of panel is clear of front frame of
oven cavity.
4. Lift
bottom up and out.
22