Filter
Top Products
PROBLEM
Nothing will
operate
(continued)
The oven will
not operate
Burner fails to
light
Burner flames
are uneven
Burner makes
popping noise
when on
Control knob(s)
will not turn
POSSIBLE CAUSE
The flow of combustion and/
or ventilation air to the range
is blocked.
The Oven Selector is not
turned to BAKE or BROIL.
A delayed start time has
been set.
The Oven Temperature
Control is not turned to a
temperature setting.
The automatic MEALTIMER
clock is not set correctly.
The Stop or Start Time
Knobs for the automatic
MEALTIMER clock are not
set at the correct time of day.
The power cord is not
plugged into
a
live circuit with
proper voftage.
A household fuse has blown
or
a
circuit breaker has
tripped.
Burner ports are clogged.
Burner ports are clogged.
Burner is wet from washing.
You
are not pushing in before
turning.
SOLUTION
Remove blockage to airflow to and
around range.
Turn the Oven Selector to the desired
setting.
Wait for the start time to be reached.
Push in and turn the Oven Tempera-
ture Control to a temperature setting.
Set the MEALTIMER clock correctly.
(See “Using the automatic
MEALTIMER” clock’ on page 16.)
If a delay start or stop is not desired,
the Stop and Start Time Knobs must be
turned to the correct time of day. Turn
knobs till they pop out.
Plug the power cord into a live circuit
with proper voltage. (See Installation
Instructions.)
Replace household fuse or reset circuit
breaker. In case of prolonged power
failure, manually light burners (see
we 8).
Clean with a straight pin (see page 25).
Clean with a straight pin (see page 25).
If this fails, call an authorized
Whirlpool@ service technician for
service.
Let dry.
Push control knob(s) in before turning
to a setting.
continued on next page
29