Filter
Top Products
Using Your Range
Continued
3. Pull drawer out a little farther until
levers stay in “up” position. Pull
drawer the rest of the way out.
Replacing the storage drawer:
1. Make sure ball bearings on oven
slide rail are positioned toward the
front of the opening.
2. Fit ends of drawer slide rails into the
oven slide rails on both sides of the
opening.
3. Slide drawer closed.
16
Use and care guide storage
Store this booklet, along with your
Cooking Guide and sales slip in the
Literature Pat, inside the storage
drawer.
To verify that the anti-tip bracket(s)
is engaged:
. Remove storage drawer.
. Look to see if the anti-tip bracket(s) is
attached to floor with screws.
. Make sure rear leveling leg(s) is
positioned under bracket(s).
l
See “Important Safety Instructions” on
page 4 and Installation Instructions for
further details.
NOTE: The range will not tip during
normal use. Tipping can occur if
excessive force or weight is applied to
open door without anti-tip bracket(s)
properly secured.