Whirlpool SF385PEE Range User Manual


 
15
5. Press the start/enter pad.
A preheating time will count down on the display.
The oven control automatically sets preheating
times based on the oven temperature you select:
For 245°F and less, the preheating time is
4 minutes.
For 250°F-445°F, the preheating time is
10 minutes.
For above 450°F, the preheating time is
15 minutes.
As the preheat countdown ends, the selected oven
temperature replaces “PrE” on the display and the
time of day reappears. You will hear a 1-second
tone, indicating the oven is ready to use.
The AccuBake system electronically regulates
the preheat time and temperature to maintain a
precise temperature range for the best cooking
results. The preheat and set temperatures may
be different at the end of the countdown. This
is normal.
NOTES:
When the oven temperature is greater than
170°F, no preheating time will be shown on the
display.
You can change the temperature setting any
time after pressing the start/enter pad. You do
not have to press the start/enter pad again.
The preheating time will not change if you
reset the temperature before the countdown
time ends.
If you are baking/roasting while the minute
timer is counting down, you can see the set
baking/roasting temperature for 5 seconds
by pressing the bake pad.
USING YOUR RANGE
YOU SEE
HEAT BAKE
O
N
START
ENTER
5 SEC
(example for set temperature
of 350°F)
PRESS YOU SEE
HEAT BAKE
O
N
BAKING/ROASTING (CONT.)
continued on next page