Filter
Top Products
33
WHEN SELF-CLEANING YOUR OVEN
PROBLEM
The Self-Cleaning cycle
will not work
CAUSE
•
You did not press the start/enter pad.
•
The door is not closed all the way.
TROUBLESHOOTING
CAUSE
•
The oven temperature seems too low or too high. See “Adjusting the oven
temperature control” on page 17 to adjust the oven temperature.
•
You did not preheat the oven before baking (if called for in the recipe).
•
You are using a pan that is not the correct type or size. Refer to a reliable
cookbook or recipe for the recommended pan type and size.
•
There is not enough air space around the pan when baking. Allow 1
1
/2 to
2 inches of air space on all sides of the pan.
•
The flame size does not fit the cookware being used.
•
When broiling, you have not completely closed the oven door.
•
The flow of combustion and/or ventilation air to the range is blocked. Make
sure nothing is blocking the middle front of the backguard.
•
The range is not level. (See the Installation Instructions.)
COOKING RESULTS
PROBLEM
Cooking results are
not what you expected
DISPLAY MESSAGES
PROBLEM
The display is showing
“PF”
“F” followed by a
number shows on the
display
CAUSE
If none of these items are causing your problem, see “Requesting Assistance or Service” on page 34.
•
There has been a power failure. Press the off/cancel pad to clear the
display, then reset the clock, if needed. (See page 12.)
•
Press the off/cancel pad to clear the display. If an “F” code appears
again, call for service. (See “If You Need Assistance or Service” on
page 34.)