Filter
Top Products
4.
Touch START.
cl
count
own
The oven will automati-
cally cook at HIGH Cook
Power.
The COOK 1 Indicator Light
will stay on to show that the
oven is cooking in the first
cycle.
The Display counts down
the time to show how much
time is left in the first cycle.
When the cooking time
ends, “End” will show on
the Display and 4 beeps
will sound. [You can stop
the beeping by opening
the door or by touching
CANCEL.] “End” will remain
on the Display and a beep
will sound every 30 sec-
onds until the door is
opened or CANCEL is
touched. The Display will
then show the time of day.
Changing the Cooking Time
Cooking time can be changed any time before touching START or during the
cycle:
1. Touch COOK 1.
2. Touch numbers for the new time.
3. Touch START.
Cook 1 cycle will continue cooking for the new time.
Cooking at Lower Cook Powers
For best results, some recipes call for lower Cook Powers. The lower the Cook
Power, the slower the cooking. Each Number Pad also stands for a different
percentage of Cook Power. Many recipes in your MICRO MENUS@ Cookbook
tell you, by number, which Cook Power to use. Recipes in other books and
magazines may tell you by name (HI, MED, LO, etc.) or percentage (IO%, 50%,
80%, etc.).
The following chart gives the percentage of Cook Power each Number Pad
stands for, and Cook Power name usually used.
automatic 100% of full power HIGH
9 = 90% of full power
8 = 80% of full power
7 = 70% of full power MED-HIGH
6 = 60% of full power
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power MED-LOW
2 = 20% of full power
1 = 10% of full power LOW
0 = no power (fan and light will be off]
12