Filter
Top Products
When the cookina time
ends, “End” will show on
the Display and 4 beeps
will sound. (You can stop
the beeping by opening
the door or by touching
CANCEL.) “End” will remain
on the Display and a beep
will sound every 30 sec-
onds until the door is
opened or CANCEL is
touched. The Display will
then show the time of day.
Changing the Cook Power
The Cook Power can be changed any time before touching START or during
the cycle.
. Touch COOK POWER.
l
Touch a number for the new Cook Power.
l
Touch START. The cycle will cook at the new Cook Power forthe original time.
OR...
l
Touch COOK POWER twice if you want to change a lower Cook Power to
HIGH.
. Touch START.
Cooking in More Than One Cook Cycle
For best results, some recipes call for one Cook Power for a certain length of
time, and another Cook Power for another length of time. Your oven can be set
to change from one to another automatically.
DO THIS...
1. Put food in the oven
and close the door.
I.
m
2. Touch COOK 1.
3. Touch Number
Pads for the cook-
ing time you want
in the first cycle.
THIS HAPPENS...
The COOK 1 Indicator
Light will come on and the
Display will show four 0’s.
The Display will show the
numbers you touched in
the order you touched
them. This example shows
3 minutes, 25 seconds.
14