Filter
Top Products
Command Pads
Touch Command Pads to tell the microwave oven what to do and in
what order. A few examples:
-CLOCK SET tells the oven you are going to set the Clock.
- START tells the oven to start.
Each Command Pad (except START, CANCEL and CLOCK SET] lights
an Indicator Light on the Digital Display. The Indicator Light comes on
when you touch the Command Pad.
Number Pads
Once you’ve touched a Command Pad to tell the oven what
you want to do, you’ll touch Number Pads to tell it...
-a time,
- a Cook Power,
- a food temperature,
-a food setting.
Programming Tone
Each time you touch a pad you will hear a tone. If you don’t hear a tone,
it is because the instruction is not correct, or because the tones have been
removed.
EXAMPLE: If you touch a Number Pad before you touch a Command Pad, you
will not hear a tone. The instruction is not correct.
If you want to remove
the programming
tone:
l
Open the door.
l
Touch CANCEL twice,
then touch START.
l
The tone will not
sound for any touch.
8
If you want to replace
the programming
tone:
l
Open the door.
l
Touch CANCEL twice,
then touch START.
l
The tone will sound for
any correct touch.
If you want to remove
all tones, except the
Minute Timer signal:
l
Open the door.
l
Touch CANCEL twice,
touch 0, then touch
START.
l
All audible tones will
be cancelled.
l
To replace the tones,
repeat the above steps,