Whirlpool SS310PEB Range User Manual


 
3. To replace, fit
the bottom corners of the
door over the ends of the hinges. Push
the door down evenly. The door will close
only when it is on the hinges correctly. If
hinges snap back against the oven frame,
pull them back out.
Removing the oven bottom
The panel in the oven bottom can be
removed for cleaning.
Burn Hazard
Make sure all parts are cool before
removing.
Failure to do so could resutt in burns.
To remove:
1. Remove
oven racks.
2. Grasp
oven bottom at finger slots on
each side.
3.
Lift
front edge of oven bottom enough to
raise tabs from slots in front frame.
4. Push
oven bottom back about W to
release flange from front frame, then
pull out.
To replace:
1. Slide
oven bottom into oven so rear tabs
fit into slots in rear wall of oven.
2. Grasp
oven bottom at finger slots and
push
it back and then down to hook the
flange under the front frame.
3. Fit
front tabs into slots in front frame.
ot in front
frame
19